| |
|
LINKS
|
BRANDS
A.Costa
A.Costa Righi, an ECOTEC company - Munich, is a leading Italian manufacturer of state-of-the-art machines and turn-key plants for the sawmilling, woodworking and parquet industry and provides a wide range of engineering, production and support services in more than 80 Countries. A. Costa Righi exports its production from Europe to South America Countries, from North america to Asia, from Russia to South Africa and Australia.
|
FULLPOWER
Asian constructor of a very wide range of machinery for general transformation of wood .
See chapter FULLPOWER on same page for more details .
Unlike what many people think, this asian constructor makes machines with very good quality (before price).
This is a very good basics for us to collaborate with this constructor .
We are representing this constructor on exclusive basics in BENELUX & France . PLEASE SEE FURTHER DOWN ON THIS SAME PAGE TO FIND OUR MORE ABOUT THIS CONSTRUCTOR. |
Optimatic
Optimatic has completely changed cost calculations and yields in the saw mill, putting it into a new light. Our customers testified that they achieved in increase in production (volume) of 20 up to 35%, depending upon the condition of the saw blades compared to the times before the Optimatic model RSMO 980 had been installed.
|
Primultini
PRIMULTINI stands for clear solutions . With a complete range of standard machines for the most difficult saw mill conditions PRIMULTINI is able to offer a complete solution for saw mills handling small and large logs in hard or soft wood. High degree of automation is possible
There also is a range of simple machines for maintaining saw blades .
PRIMULTINI is pleased to offer you one single machine or a full production unit. Production of large volumes of wood in a safe way using high quality machine: that is the reason why PRIMULTINI is elected partner by many saw mills worldwide.
|
stellite tipping sawblades
stellite tipping 1/2 manual or completely automatic. using welding equipment TIG and assuring in such way that teeth won't crack off. On the other hand, the gas is cheaper than the plasma - gas.
|
vacuum - lifting
vacuum - lifting of boards is a job is a hard times job when its done just by 2 men. With a vacuum - hoist, one can avoid the second man and get the job done more quickly and in all safety .
the system MANUT-LM offers no need for an electric hoist which makes the suporting beem more light weight and avoid to a minimum the swing inside the been when displacing loads. |
WRAVOR
WRAVOR is a Slovenian constructor for horizontal logbandsaws.
The range of products is differing from the cheaper models built by competitors who use narow bandsaw techniques together with manual clamping. Our bandmills are built in such way that the competition with bigger high production maills can be fought on the field of userfriendlyness and with less cost for foundations.
WRAVOR is a family - owned company which is the best warranty for construction of special projects. With WRAVOR it is possble to run a double cut bandmill WITHOUT operator as it is running in France. |
FULLPOWER
BAND RESAW without need for foundation
Very strong band resaw with no foundation pit needed.
We recommend this XHD machine for use with timber sales stocks / flooring production / frames & doors production but also for packaging wood / pallets, or carpentry , ...
We distinguish ourselves from any competitor through :
- Cast iron construction
- Double feed roll unit to feed the lumber through the saw. Equipped also with hydraulic feed and closing . eventually with manual or semi - automatic reading of wood - presence . I know for sure this is the only resaw in this categorie to offer you the feed of lumber without any manual effort !
- 30 HP minimal and 40 HP in option.
- Frequency controlled linear speed of the sawblade to adapt the most wide variety of wood species without need to change the sawblade.
- Sawblade width 100 mm (4 inch) and choice between 0,9 and 1,0 mm balde thickness. (possible to cut dried flooring aok wook with width of track only 2,0 mm .)
-No need for foundation !!
-guide fence can tilt as necessary for fencing wood .
-Possibility for long range of warranty (up to 3 years) in function of working conditions with the customers. One can use this machine 24/24 and 7/7
- mist spraying to grease the sawblade and scrapers on the bandwheels.
Please ask for our list of references . |
END MATCHING MACHINE
THE FULLPOWER END MATCHING MACHINE IS A STABLE, ECONOMICAL, WELL DESIGNED AND CONSTRUCTED MACHINE TO SOLVE THE PROBLEMS OF END MATCHED TIMBER. (SPECIALLY FOR TENONING & MORTISING FLOORING ENDS OR FINGER SHAPING)
THE FULLPOWER END MATCHING MACHINE HAS A VERY WELL COMPACT DESIGN AND MEANWHILE CAN OFFER THE CAPACITY TO HANDLE THE LARGEST OF BOARDS. IT’S RIGID AND RELABLE BUILT AND SATISFYING WORLWIDE CUSTOMERS . IT CAN HELP TO OVERCOME THE END MATCHING PROBLEMS OF USING HARD WOOD. OUR END MATCHING MACHINE OFFERS A VERY HIGH ACCURACY PERFORMANCE. THE WOODPIECES ARE FED INTO THE MACHINE AUTOMATICALLY VIA RUBBER TOP ROLLERS AND PNEUMATIC SIDE & TOP PRESSURE DEVICE. AND, OPTIONAL MOTOR DRIVEN INFEED AND OUTFEED CONVEYORS CAN BE CONNECTED.
|
straight line board edger
This machine is not suited for the bigger sawmils, producing large volumes of edged timber. It is a versatile tool to fit smaller production units of quality wood.
Unike the bigger (and more expensive) board egders with movable blades, this technique does not allow to cut off both strips of wasted wood at the edges in a single feed through. One needs to bring the board back to the front operator for second cut. this allows quality - check .
Full equiped with pneumatic guiding fence, laser line , 14 HP motor and a feeding track on both left and right side of the saw warranty straight cut boards. |
OPTIMATIC USERS
Compagnie des bois du GABON
CBG is a big time customer for SEYNA. They use a whole lot of machines in bioth their sawmills in PORT GENTIL .
the sawdoctoring room with CBG is unique. It is air conditionned and fully automatic.
OPTIMATIC is responsible for part of that .
This customer one wrote to us : MY OPTIMATIC IS FANTASTIC. |
DEMONTY
Sawmill DEMONTY is one of those customers we are justto proud to have them with us. This mil proves everyday that it is possible to cut straight and just right with double cut bands. Just you make sur ethat the levelling - tensionig and straightening is done right and one can do so with OPTIMATIC model RSMO 980 .
|
DUSAUSOIT hardwood sawmill
DUSAUSOIT rtimber is upon today the only european hardwood sawmil running the automated bench model RSMO 980 from OPTIMATIC
|
FABRICANTES DE SIERAS REUNIDOS (Spain)
FSr in north of Spain is the company that sells the biggest volume of UDDEHOLM bandsaws steel in Spain. They run model RSMO 980 to make sure that their most difficult customers receive blades where they can rely on. |
HOFFMANN Atzerath (Belgium)
Sawmill HOFFMANN trade is usind the very 1st OPTIMATIC model RSMO980 that was built for the European market.
We are very proud to know that thebrothers HOFFMANN are very happy with this valuable machine inside their mill. |
HUPKES HOUTHANDEL
HUPKES is specialising in extremely hardwoods mainly coming from Africa. this customer uses models RMO in their mills in Cameroun and Gabon. The home seat in Holland (Dieren) runs models RSMO 980 just to make sure they get the best posible flatness & tension + starightness intheir saws to cutthe EKKI and other hardwood species.
|
MOREL timber in France
MOREL lumber is pecialising in the prime quality oak trees France is so well known for . he uses model RMO 940 from OPTIMATIC .
|
PAULS sawmill in Sankt Vith
The combination of both OPTIMATIC model RMO & SMO make sure that PAULS TIMBER cuts lots of miles of straight lumber every day
|
School in France
In SAULXURES / MOSELOTTE one can find one of the last possible schools infrance where to learn the skils of sawdoctoring for wide bandsaws. The teacher, (Mr. Michel DUPRE) has made a very carefull selection througout the possibilities on the market before choosing OPTIMATIC model RMO 940 to show to his pupils.
|
THYS lumber
THYS lumber must be the eldest OPTIMATIC - user in Belgium since VAN MAELE has stopped activity. Mr. Dirk THYS has 1st been using models RMO & SMO and since 2008, he runs the automated bench model RSMO . This sawmill is a special sawmil for north of Belgium because they do not stop investing in the best equipment to serve their customers with fine quality lumber .
|
WIJMA group
Customer WIJMA is known around the world as supplier for the hardest wood . They know the importance of a good cutting tool and therefor they run model RMO in all sawmills . These mills are in Camermoun (2 mills), Ghana - Invory coast and also at the homeseat in Kampen.
|
SPECIAL PROJECTS
vacuum lifting of precious woods
Our customer TOUCHWOOD bv is running his own sawmill in the most northern parts of this planet.
Managing director (JOHN LAMMERTS VAN BUEREN) flies to his mill to make sure that the precious woods are cut to the exact instructions of his customers in Europe .
We have supplied to this customer a vacuum lift to handle board up to 12 meter of length .
You must have a look at the site, if not for the machines or the wood, the pictures of the nature are quit impressive .
|
Webdesign
My-websitebuilder.com
My-Websitebuilder is an integrated system for web development and hosing that allow powerful and functional internet sites at affordable prices.
|
|
|
