Tola stammen worden ontdaan van spint in NIOKI
Het vervoer van een door ons geleverde herzaagmachine in Tanzania gebeurt soms met een beetje overdreven groot materiaal .
PRIMULTINI @ LIMHOUT.
Enkele dappere Kongolezen verplaatsen even een stam die in hun weg ligt ?
FULLPOWER bandherzaag FTF-900 N met SWEED CE 300 + vader & onze jongste dochter
DECOLVENAERE in GENT
De nieuwe herzaagmachine is bijna gemonteerd
In KINSHASA kan het soms lastig zijn om vooruit te geraken :)
bij een zagerij die wij leveren in Canada wordt het zagemeel 'op z'n Amerikaans' opgehaald
Hard labeur bij demontage van een zagerij in Duitsland
.JPG)
Schulte HB20 Logbandsaw
Headrig specification
Manufacturer: Schulte (Germany)
Type: HB20
Year: 1973
Wheel diameter: 1800mm (6ft)
Wheel width: 240mm
Saw width max: 260mm (10 3/8”)
Maximum passage between columns: 2350mm
Maximum depth of cut
Saw to upper beam: 820mm
Max opening between sawguides: 2050mm
Max log diameter: 2300mm
Max log length: 13,2m / 43ft
Main drive (2-Speed) 67/90kw 91/122hp
750/1000rpm
Sawblade size: 12200 x 260 x 1,65mm
Further spec;
- Electric sawblade tensioning
- IP54 electrics – 380 Volt – 50Hz
- 2 pre-edging saws, 9,2kw each, max depth of cut 146mm, saw diameter 500mm
- Electric setworks for both pre-edging saws
- Driven brush on outfeed side
- Operator control panel with standard metric setworks
- Electric sawguide adjustment
- Standard sawguides (no pressure guides)
Carriage specification:
Carriage width: 2.160mm
Carriage overall length: 11800mm + front support for cables 750mm.
Hydraulic dogging stations; 9
Dog position, front to aft: 0 – 1600 – 3100 – 4500 – 6000 – 6800 – 8100 – 9100 – 1010 - 11000
Hydraulic log turners: 2
Positions of log tuners front to aft: 0 – 5100 – 7500
Opening between dogs: 1470mm
Carriage height: 470mm – top of rails to upper carriage surface
Dogging and turner operation: Central control with direct directional control valves
Carriage drive: Wire drive with new hydraulic drive, 22kw (a standard pack has replaced the old Boeringer Sturm drive)
Vacuum lift system
Manufacturer: Lewecke (Germany)
Year: 1989
Number of pads: 6
Lift per pad: 200kg – total 1200kg / approx. 2500lbs
Maximum transverse travel: 9100 mm
Max distance carriage top to bottom
Vacuum suction pads: 1800 mm
Semi-automatic system with wide gantry lifting the board(s) from the log directly on to the edger, the outfeed rollers of the buffer position.
